HYDRAULIC CYLINDERS - THREAD NECK MOUNTING

Mounting Types:
     Threaded Neck

Actuation Media:
     Mineral oil

Application:
     High Pressure Die Casting (HPDC)

Available Bore:
      50 mm
      63 mm
      73 mm
      80 mm
      100 mm
      110 mm
      125 mm

Maximum Stroke:
250mm up to 80mm bore cylinders
200mm above 100mm Bore cylinders

Max. Working Pressure:
200 Kg/Sq. Cm (2800 Lbs/Sq. Inch) 

High Pressure Die Casting (HPDC) is an area where bigger castings are cast with many intricacies. Many cores are involved to form internal cavities in the castings. The cylinders are directly mounted on the dies in application. The cylinder parts are machined, since carburized material. Piston Rings are used as piston seals. A set of Chevron packing is used as rod seal. The cylinder mounting is on the threading provided on the projection (Neck) of the cylinder body itself. Hence the cylinders are termed as Threaded Neck Mounting.

01  |  02